Palmako Lisa 4.7m x 3.7m 44mm Log Cabin Garden Room

The Palmako Lisa (SKU 102197) is a 44mm pent roof log cabin measuring 4.7m x 3.7m (15ft x 11ft) externally. The base footprint is 4500mm x 3300mm giving you 14.2m² of usable internal floor space. That is enough room for a proper home office setup or a family entertainment space.

Walls are built from 44mm interlocking Nordic spruce logs with a chalet-cut profile for a tighter fit and better wind and rain resistance. Wind braces add structural stability. The floor and roof are both 19mm tongue and groove boards supported by pressure treated floor joists. No roof covering is supplied you choose EPDM rubber membrane, SBS torch-on felt or basic underlay felt as an add-on.

Fully glazed double doors use safety glass with a laminated frame that resists warping. A key-operated cylinder lock secures the doors. Two large opening windows are double glazed with rubber seals to cut draughts. Cable routing for electrics is possible through the log wall construction.

This is a well-specified log cabin with a 5-year guarantee. 44mm walls and double-glazed sealed windows make it comfortable across most of the year. Treat the timber on assembly and annually to maintain the structure long term.

The Palmako Lisa uses 44mm interlocking Nordic spruce logs with a chalet-cut profile. The chalet cut creates a tighter overlap between each log course which reduces gaps and improves resistance to wind-driven rain. Wind braces are fitted internally for structural rigidity. The floor and roof are both 19mm tongue and groove boards a well-established construction method that handles moisture movement well. The floor sits on pressure treated joists to prevent ground moisture damage. Windows are double glazed with rubber seals to reduce heat loss. Doors use safety glass in a laminated frame that resists warping. No roof covering is included EPDM single-sheet rubber membrane is the recommended long-term option for this pent roof profile.

Walls: 44mm interlocking Nordic spruce logs with chalet-cut profile. Floor and roof: 19mm tongue and groove Nordic spruce boards. Floor joists: pressure treated timber. Doors: safety glass in laminated timber frames. Windows: real glass, double glazed with rubber seals. No OSB, SIP panels or composite materials used. Roof covering is not supplied.

A solid level base is required before installation. A concrete slab or paving slabs are the standard choice. A plastic interlocking base kit sized 3m x 4.5m is available as an accessory it uses 70 recycled plastic squares over a weed membrane. No base is supplied with the cabin. The buyer prepares the ground themselves.

The cabin is delivered flat packed for self-assembly. Walls use an interlocking log system and the floor and roof use tongue and groove boards. Wind braces and a stainless-steel door sill are included. Roofing nails and roof covering are sold separately. Two people are recommended for assembly. Full instructions are not explicitly mentioned for the main cabin but the extension accessory comes with an assembly kit.

A professional installation service is available check at checkout for availability in your postcode. Base preparation is not covered by the installation service. Roof covering using EPDM or SBS must be fitted separately by someone with advanced DIY skills or a professional roofer. Solar lighting installation is also excluded.

No wiring or electrical components are supplied. Cable routing through the log wall construction is possible. All electrical installation must be carried out by a qualified electrician. A solar lighting kit is available as an accessory but is not included with the building.

The cabin arrives untreated. Apply a quality wood preservative on assembly and repeat every year to protect against rot. Five litres of Timmersol covers 12m² and five bottles are recommended for this building. Clean glazing regularly and check the roof covering each year for damage. Clear debris from the roof and gutters to prevent water pooling.

With 14.2m² of internal floor space this cabin fits a full home office desk setup with room for storage shelving or a small sofa. Two people could work comfortably side by side. It also works well as a hobby room, art studio or music room. The 2110mm eaves height gives good headroom throughout. It is not large enough for a full gym but a compact exercise bike or weights bench would fit. The ample glazed frontage makes it feel open and well-lit for daytime working.

Most garden buildings in England fall under permitted development and do not need planning permission if they are single storey, ancillary to the main dwelling and not forward of the principal elevation. This cabin has a ridge height of 2390mm and eaves of 2110mm. Rules differ in Scotland, Wales and Northern Ireland. Always check with your local planning authority before you build. This is not legal advice.